|
|
Description:
The J.U.M. Engineering HFID Model 5-100 is
a low-cost 19" rack mount heated total hydrocarbon analyzer
for high accuracy, sensitivity and stability.
The Model 5-100 uses a hydrogen flame ionization
detector (FID) in a heated oven to prevent the loss of high molecular
weight hydrocarbons and to provide reliable performance in the
analysis of trace level of contaminants in high purity gases,
air and other gases. If equipped with option LTO 51 the
analyzer is ideal for measuring trace hydrocarbons in high purity
gases (5 ranges from 0-1ppm to 0-10.000ppm). It is also equipped
with an automatic fuel shut of valve that interrupts fuel gas
flow when the FID flame goes out.
Sample has to be introduced to the analyzer
in prssurized form (max 1.5 bar, 22 psig).
Therefore the Model 5-100 is ideal for integration
in CEM-Systems.
Major Applications:
- Stack gas hydrocarbon emissions monitoring
- Catalytic converter testing
- Raw exhaust vehicle emissions
- Detection of trace hydrocarbon levels in
purity gases
- Monitoring of hydrocarbon contaminants in
air and other gases
- Carbon adsorption regeneration control
- Measuring engine combustion efficiency
- LEL monitor of solvent-laden air
- Cryogenics/liquefaction
- Clean room applications
|
|
|
1
Technical Data |
|
|
|
Method of Analysis |
Flame Ionzsation Detector |
|
Sensitivity |
Max. 0.1 ppm CH4 |
|
Response Time |
0.2 seconds |
|
Zero Drift |
<1.0% full scale / 24h |
|
Span Drift |
<1.0% full scale / 24h |
|
Linearity |
within 1% of selected range |
|
Oxygen Synergizm |
< 1.2% |
|
Measuring Ranges (ppm) |
0-10,100, 1.000, 10.000, 100.000, others on request |
|
Signal Outputs |
0-10VDC and 4-20mA |
|
Display |
3 1/2 digit |
|
Fuel consumption 100% H2 |
20 ml/min @ 1.5 bar (22
psig) |
|
Fuel consumption H2He 40/60-Mix |
90ml/min @ 1.5 bar (22
psig) |
|
Burner Air Consumption |
max. 300 ml/min @ 1.5 bar (22
psig) depending on fuel gas |
|
Oven Temperature |
190°C (374°F) |
|
Temperature Control |
electronic PID-type controller |
|
Power Requirements |
230VAC/50Hz, 850 W or 115VAC/60Hz,
850 W |
|
Ambient Temperature |
5-43°C (41-110°F) |
|
Dimensions (W x D x H) |
483 mm x 460 mm x 132 mm |
|
Weight |
approx. 12 kg (28 lbs) |
|
|
|
|
1 Available Options |
|
|
|
|
AMU 51 |
Automatic range change |
|
AZM 51 |
Automatic flame ignition |
|
CIM 51 |
RS 232 data output |
|
ENGA 51 |
6-digit display, 0-100.000 ppm |
|
ICM 51 |
Built-In NMHC Cutter, measure either THC or Methane-Only
with one analyzer |
|
LTO 51 |
Special option
for measuring low trace hydrocarbon levels |
|
MWR 51 |
Built in mean value calculator |
|
RCA 51 |
0-20 mA analog output instead of 4-20 mA |
|
RCC 51 |
Remote control range change |
|
RCI0 51 |
0-20 mA analog output, galvanically isolated |
|
RCI4 51 |
4-20 mA analog output, galvanically isolated |
|
|
Click here
for a detailed overview and description of all available HFID
options |