|
|
Description:
The J.U.M. Engineering HFID Model 3-200 is
a portable "all-in-one" heated total hydrocarbon analyzer
for high accuracy, sensitivity and stability.
The Model 3-200 uses a hydrogen flame ionization
detector (FID) in a heated oven to prevent the loss of high molecular
weight hydrocarbons and to provide reliable performance in the
analysis of trace level of contaminants in high purity gases,
air and other gases.
The permanent heated sample filter is cleaned
by backpurging and has a replaceable stainless steel mesh filter
disc. It has a built-in burner air supply so there is no extra
cylinder needed.
A special portable container for fuel- and
spangas is also available.
Europe only!
Download 3-200 product brochure as pdf-file (726kB).
(requires Adobe Acrobat Reader 4.0)
Major Applications:
- Stack gas hydrocarbon emissions monitoring
- Catalytic converter testing
- Raw exhaust vehicle emissions
- Detection of trace hydrocarbon levels in
purity gases
- Monitoring of hydrocarbon contaminants in
air and other gases
- Carbon adsorption regeneration control
- Measuring engine combustion efficiency
- LEL monitor of solvent-laden air
- Cryogenics/liquefaction
- Clean room applications
|
|
|
1
Technical Data |
|
|
|
Method of Analysis |
Flame Ionization Detector |
|
Sensitivity |
Max. 0.1 ppm CH4 |
|
Response Time |
0.2 seconds |
|
Zero Drift |
<1.0% full scale / 24h |
|
Span Drift |
<1.0% full scale / 24h |
|
Linearity |
within 1% of selected range |
|
Oxygen Synergizm |
< 1.2% |
|
Measuring Ranges (ppm) |
0-10,100, 1.000, 10.000, 100.000, others on request |
|
Signal Outputs |
0-10VDC and 4-20mA |
|
Display |
3 1/2 digit |
|
Sample Pump |
approx. 2.5 l/min capacity @ operating temp. |
|
Fuel consumption 100% H2 |
20 ml/min @ 1.5 bar (22
psig) |
|
Fuel consumption H2He 40/60-Mix |
90ml/min @ 1.5 bar (22
psig) |
|
Burner Air Consumption |
NONE, built in burner air supply |
|
Oven Temperature |
190°C (374°F) |
|
Temperature Control |
electronic PID-type controller |
|
Power Requirements |
230VAC/50Hz, 850 W or 115VAC/60Hz,
850 W |
|
Ambient Temperature |
5-43°C (41-110°F) |
|
Dimensions (W x D x H) |
300 mm x 580 mm x 204 mm |
|
Weight |
approx. 18 kg (40 lbs) |
|
|
|
|
1 Available Options |
|
|
|
|
AMU 32 |
Automatic range change |
|
APO 32 |
External automatic programmable backpurge system
for the sample filter |
|
AZM 32 |
Automatic flame ignition |
|
CIM 32 |
RS 232 data output |
|
ENGA 32 |
6-digit display, 0-100.000 ppm |
|
FOAS 32 |
Flame out control with automatic fuel shut off
valve |
|
ICM 32 |
Built-In NMHC Cutter, measure either THC or Methane-Only
with one analyzer |
|
LTO 32 |
Special option
for measuring low trace hydrocarbon levels |
|
MWR 32 |
Built in mean value calculator |
|
PDA 32 |
Sample pressure monitor with alarm |
|
RCA 32 |
0-20 mA analog output instead of 4-20 mA |
|
RCC 32 |
Remote control range change |
|
RCI0 32 |
0-20 mA analog output, galvanically isolated |
|
RCI4 32 |
4-20 mA analog output, galvanically isolated |
|
|
Click here
for a detailed overview and description of all available HFID
options |