|
J.U.M.'s Model FP 605 reliably detects diesel oil, jet fuel and oil in water. The FP 605 is a continuous, on-line, process or field control monitor which provides oil monitoring in water down to the low ppm range. The FP 605 is used for applications which require oil monitoring in treated and untreated wastewater streams. This could be from industrial wastewater, groundwater, process water, produced water and storm water run-off. Continuous monitoring of PAH's (Poly-Aromatic Hydrocarbons) is a reliable, effective, and well recognized method to improve the process management for treating, discharging and detecting oils in water. Compared to the laboratory grab sample analysis method, continuous on-line monitoring provides cost effective, remote, operator unattended measurement of poly aromatic hydrocarbons in water. |
With our proprietary Open Cuvette Flowcell, the FP 605 does not use a glass flow cell. The polyaromatic hydrocarbons are detected in a stream of water which smoothly overflows an open cuvette; the water stream cannot contact, contaminate or foul the optical windows which are used for the detection of the polyaromatic hydrocarbons. No chemicals, no pre-treatment and no manual manipulation of the sample are required to monitor polyaromatic hydrocarbons. Major Applications include continuous monitoring or field monitoring of oil in water from Oil coolers, Oil separators, Condensors, Heat Exchangers. The Model FP 605 is available either with or withouit sample pump as a Stationary Wall Mount unit or as a Stationary 19" Rack Mount unit or as a Portable Field Analyzer. |
||||||||
|
Model 605T Oil in Water Field Monitor |
|
